WORK SCHWERT BRUNNEN 21 inch STEP RIM – Brilliant Silver Black

商品番号: WORK-SWBRN-2P-21-BSB-8.5-SR-ADISK

WORK SCHWERT BRUNNEN 21 Inch STEP RIM

¥120,743 ¥145,954 保存 ¥25,211

配送料はチェックアウト時に計算されます

Width: 21×8.5J
Colour: Brilliant Silver Black (BSB)
Disk: A-Disk · Standard

The WORK SCHWERT BRUNNEN in 21 inch STEP RIM, built to order in Japan. This is a genuine two-piece WORK wheel: you choose the width, the disc colour and the disk here, then tell us the exact inset you want from WORK's ranges below, and WORK machines the wheel to that spec.

WORK photographs Brilliant Silver Black, Silky Rich Silver at this exact size and rim type.

What this page covers

Model WORK SCHWERT BRUNNEN
Construction 2-piece
Diameter 21 inch
Rim type STEP RIM
Disc colours Brilliant Silver Black (BSB), Silky Rich Silver (SRS)
Widths 21×8.5J to 21×12.5J (9 widths)
Disk types A-Disk (STANDARD), O-Disk (DEEP RIM)
P.C.D. A-Disk: 5H-114.3(73.3), 5H-120(60)
O-Disk: 5H-114.3(73.3), 5H-120(60)
Special P.C.D. 5H-100 to 5H-120.65 — WORK custom order, from ¥11,000 per wheel
Hub height clearance A-Disk 51 mm, O-Disk 36 mm
Load rating JWL-P735KG
Air valve V24C
Rim finish Buff anodised (standard)
WORK catalogue code SWB-SR・HNH

What you choose on this page

  • Width, disc colour and disk — in the variant picker above. The disk sets the face shape, the hub clearance and the inset window.
  • Inset — enter it in the inquiry form below, using the ranges below. Any inset inside your disk's range can be built.
  • Quantity — the price shown is for one wheel.

Order inset ranges — 21 inch STEP RIM

WORK builds these wheels to your inset rather than to fixed steps. Choose your disk above, then name any inset within that disk's range for your width. The rim depth beneath each range is what that inset produces.

Width A-Disk — STANDARD
hub height clearance 51 mm
5H-114.3(73.3), 5H-120(60) 		O-Disk — DEEP RIM
hub height clearance 36 mm
5H-114.3(73.3), 5H-120(60)
21×8.5J +34 to -5rim depth 52–91 mm +49 to +10rim depth 52–91 mm
21×9.0J +40 to -11rim depth 52–103 mm +55 to +4rim depth 52–103 mm
21×9.5J +46 to -17rim depth 52–115 mm +61 to -2rim depth 52–115 mm
21×10.0J +53 to -24rim depth 52–129 mm +68 to -9rim depth 52–129 mm
21×10.5J +59 to -30rim depth 52–141 mm +74 to -15rim depth 52–141 mm
21×11.0J +65 to -36rim depth 52–153 mm +80 to -21rim depth 52–153 mm
21×11.5J +72 to -43rim depth 52–167 mm +85 to -28rim depth 54–167 mm
21×12.0J +77 to -49rim depth 53–179 mm +85 to -34rim depth 60–179 mm
21×12.5J +71 to -55rim depth 65–191 mm +85 to -40rim depth 66–191 mm

Notes

  • Price is per wheel. Built to order by WORK in Japan; allow for production time.
  • Each wheel comes with one centre cap and one air valve (V24C).
  • The Brilliant Silver Black disc takes a matte grey centre cap.
  • A buff-anodised rim is the standard finish.
  • Below 75 mm of rim depth the disc sits proud of the rim mating face — though WORK notes that even above that depth the disc may still protrude very slightly past the rim flange, within tolerance.
  • Rated JWL-P735KG (Japanese passenger-car standard).
  • Special P.C.D. 5H-100 to 5H-120.65 is available as a WORK custom order, from ¥11,000 per wheel (about US$65) on top of the listed price.
  • Please ask us about the nuts or bolts you intend to use.
  • WORK offers free TPMS processing on this model, with no size or specification excluded. Tell us if you need TPMS and we will confirm the sensor for your exact specification with WORK.
Fitment. Please choose your size and offset at your own discretion. Wheel regulations differ by country, and how far a wheel sits outside the fender depends on ride height and personal preference. We are glad to advise — ask us before you order — but the final choice of size and offset rests with the customer. Any vehicle examples shown are reference sizes only.

お見積り・適合確認のお問い合わせ

ご検討中の仕様と、装着するお車についてお知らせください。ご注文を確定する前に、当店がWORKに適合を確認します。このフォームはお問い合わせ専用です。ご注文にはならず、カートにも追加されません。

このページで選択中の仕様

WORK SCHWERT BRUNNEN 21 Inch STEP RIM

21×8.5J / Brilliant Silver Black (BSB) / A-Disk · Standard

SKU: WORK-SWBRN-2P-21-BSB-8.5-SR-ADISK

ご連絡先

WORKホイールは受注生産です。当店からのご提案は参考情報で、基本的に純正（OEM）状態のお車を前提としています。ビッグブレーキキット装着車は確認できる場合がありますが、ワイドボディや車高調の仕様は確認が難しくなります。最終的な仕様はお客様ご自身でご判断ください。生産開始後のキャンセルはお受けできません。輸入関税・税金は、輸入時に別途ご請求となります。