WORK LANVEC LS10 20 inch STEP RIM – GR Silver Cut Clear

商品番号: WORK-LVLS10-2P-20-GRP-8.0-SR

WORK LANVEC LS10 20 Inch STEP RIM

¥99,436 ¥120,197 保存 ¥20,761

配送料はチェックアウト時に計算されます

Width: 20×8.0J
Colour: GR Silver Cut Clear (GRP)

The WORK LANVEC LS10 in 20 inch STEP RIM, built to order in Japan. A genuine two-piece WORK wheel: choose the width and disc colour here, then tell us the inset you want from WORK's table below, and WORK builds the wheel to that spec.

WORK photographs GR Silver Cut Clear, Glim Black at this exact size and rim type.

What this page covers

Model WORK LANVEC LS10
Construction 2-piece
Diameter 20 inch
Rim type STEP RIM
Disc colours GR Silver Cut Clear (GRP), Glim Black (GTK)
Widths 20×8.0J to 20×12.5J (10 widths)
Disk types O-Disk (DEEP RIM)
P.C.D. O-Disk: 5H-100(60), 5H-114.3(73.3)
Special P.C.D. Not offered on this model
Hub height clearance O-Disk 41 mm
Load rating WORK prints no JWL rating for this size and rim type
Air valve V24C
Rim finish Buff anodised (standard)
WORK catalogue code LST-SR・HRN

What you choose on this page

  • Disc colour and width — in the variant picker above.
  • Inset — enter it in the inquiry form below, using the table below. Pick either one of WORK's fixed standard insets or any inset inside the order range — the price is the same.
  • Quantity — the price shown is for one wheel.

Insets — 20 inch STEP RIM

Width O-Disk — DEEP RIM
hub height clearance 41 mm · 5H-100(60), 5H-114.3(73.3)
Standard inset
fixed, same price 		Order inset
20×8.0J +45rim depth 53 mm / +35rim depth 63 mm +48 to +18rim depth 50–80 mm
20×8.5J +45rim depth 60 mm / +35rim depth 70 mm +55 to +11rim depth 50–94 mm
20×9.0J +45rim depth 66 mm / +35rim depth 76 mm +61 to +5rim depth 50–106 mm
20×9.5J +45rim depth 72 mm / +35rim depth 82 mm +67 to -1rim depth 50–118 mm
20×10.0J +35rim depth 89 mm +74 to -8rim depth 50–132 mm
20×10.5J — +80 to -14rim depth 50–144 mm
20×11.0J — +85 to -20rim depth 51–156 mm
20×11.5J — +85 to -27rim depth 58–170 mm
20×12.0J — +85 to -33rim depth 64–182 mm
20×12.5J — +85 to -39rim depth 70–194 mm

Notes

  • Price is per wheel. Built to order by WORK in Japan; allow for production time.
  • Each wheel comes with one centre cap and one air valve (V24C).
  • A buff-anodised rim is the standard finish.
  • Below 66 mm of rim depth the disc sits proud of the rim mating face — and WORK adds that there is no protrusion past the rim flange.
  • Please ask us about the nuts or bolts you intend to use.
  • WORK offers free TPMS processing on this model, excluding 18 inch in 8.0J and narrower widths. Tell us if you need TPMS and we will confirm the sensor for your exact specification with WORK.
Fitment. Please choose your size and offset at your own discretion. Wheel regulations differ by country, and how far a wheel sits outside the fender depends on ride height and personal preference. We are glad to advise — ask us before you order — but the final choice of size and offset rests with the customer. Any vehicle examples shown are reference sizes only.

お見積り・適合確認のお問い合わせ

ご検討中の仕様と、装着するお車についてお知らせください。ご注文を確定する前に、当店がWORKに適合を確認します。このフォームはお問い合わせ専用です。ご注文にはならず、カートにも追加されません。

このページで選択中の仕様

WORK LANVEC LS10 20 Inch STEP RIM

20×8.0J / GR Silver Cut Clear (GRP)

SKU: WORK-LVLS10-2P-20-GRP-8.0-SR

ご連絡先

WORKホイールは受注生産です。当店からのご提案は参考情報で、基本的に純正（OEM）状態のお車を前提としています。ビッグブレーキキット装着車は確認できる場合がありますが、ワイドボディや車高調の仕様は確認が難しくなります。最終的な仕様はお客様ご自身でご判断ください。生産開始後のキャンセルはお受けできません。輸入関税・税金は、輸入時に別途ご請求となります。