WORK LANVEC LDZ 20 inch STEP RIM – Black

商品番号: WORK-LVLDZ-2P-20-BLK-8.0-SR

WORK LANVEC LDZ 20 Inch STEP RIM

¥96,392 ¥116,518 保存 ¥20,126

配送料はチェックアウト時に計算されます

Width: 20×8.0J
Colour: Black (BLK)

The WORK LANVEC LDZ in 20 inch STEP RIM, built to order in Japan. A genuine two-piece WORK wheel: choose the width and disc colour here, then tell us the inset you want from WORK's table below, and WORK builds the wheel to that spec.

WORK photographs Black, Cut Clear at this exact size and rim type.

What this page covers

Model WORK LANVEC LDZ
Construction 2-piece
Diameter 20 inch
Rim type STEP RIM
Disc colours Black (BLK), Cut Clear (MSP)
Widths 20×8.0J to 20×12.5J (10 widths)
Disk types O-Disk (DEEP RIM)
P.C.D. O-Disk: 5H-114.3(73.3), 5H-120(60)
Special P.C.D. Not offered on this model
Hub height clearance O-Disk 45 mm
Load rating JWL-P735KG
Air valve V24C
Rim finish Buff anodised (standard)
WORK catalogue code LDZ-SR・HRN
5H-120 — remaining stock only. WORK prints 5H-120(60) as a standard P.C.D. for this size and rim type, but has ended production of the 5H-120 disc for 20 inch STEP RIM and for 19 inch FULL REVERSE on this model, and supplies it only while its remaining stock lasts. If you need 5H-120, ask us before ordering and we will confirm with WORK whether stock is still available. 5H-114.3(73.3) is in normal production and is not affected.

What you choose on this page

  • Disc colour and width — in the variant picker above.
  • Inset — enter it in the inquiry form below, using the table below. Pick either one of WORK's fixed standard insets or any inset inside the order range — the price is the same.
  • Quantity — the price shown is for one wheel.

Insets — 20 inch STEP RIM

Width O-Disk — DEEP RIM
hub height clearance 45 mm · 5H-114.3(73.3), 5H-120(60)
Standard inset
fixed, same price 		Order inset
20×8.0J +45rim depth 49 mm / +35rim depth 59 mm +46 to +18rim depth 48–76 mm
20×8.5J +45rim depth 56 mm / +35rim depth 66 mm +53 to +11rim depth 48–90 mm
20×9.0J +45rim depth 62 mm / +35rim depth 72 mm +59 to +5rim depth 48–102 mm
20×9.5J +45rim depth 68 mm / +35rim depth 78 mm +65 to -1rim depth 48–114 mm
20×10.0J +35rim depth 85 mm +72 to -8rim depth 48–128 mm
20×10.5J — +78 to -14rim depth 48–140 mm
20×11.0J — +84 to -20rim depth 48–152 mm
20×11.5J — +85 to -27rim depth 54–166 mm
20×12.0J — +85 to -33rim depth 60–178 mm
20×12.5J — +85 to -39rim depth 66–190 mm

Notes

  • 5H-120 availability — remaining stock only. WORK has ended production of the 5H-120 disc for this size and rim type, and for 19 inch FULL REVERSE. It can be supplied only while WORK's remaining stock lasts, and we confirm availability with WORK before accepting such an order. The standard 5H-114.3(73.3) disc is unaffected.
  • Price is per wheel. Built to order by WORK in Japan; allow for production time.
  • Each wheel comes with one centre cap and one air valve (V24C).
  • A buff-anodised rim is the standard finish.
  • Below 66 mm of rim depth the disc sits proud of the rim mating face — and WORK adds that there is no protrusion past the rim flange.
  • Rated JWL-P735KG (Japanese passenger-car standard).
  • Please ask us about the nuts or bolts you intend to use. WORK notes that its standard 5H-114.3 P.C.D. takes M14 mounting bolts, with a 60° taper seat.
  • WORK offers free TPMS processing on LANVEC LDZ, excluding 18×8.0J and below. Tell us if you need TPMS and we will confirm the sensor for your exact specification with WORK.
Fitment. Please choose your size and offset at your own discretion. Wheel regulations differ by country, and how far a wheel sits outside the fender depends on ride height and personal preference. We are glad to advise — ask us before you order — but the final choice of size and offset rests with the customer. Any vehicle examples shown are reference sizes only.

お見積り・適合確認のお問い合わせ

ご検討中の仕様と、装着するお車についてお知らせください。ご注文を確定する前に、当店がWORKに適合を確認します。このフォームはお問い合わせ専用です。ご注文にはならず、カートにも追加されません。

このページで選択中の仕様

WORK LANVEC LDZ 20 Inch STEP RIM

20×8.0J / Black (BLK)

SKU: WORK-LVLDZ-2P-20-BLK-8.0-SR

ご連絡先

WORKホイールは受注生産です。当店からのご提案は参考情報で、基本的に純正（OEM）状態のお車を前提としています。ビッグブレーキキット装着車は確認できる場合がありますが、ワイドボディや車高調の仕様は確認が難しくなります。最終的な仕様はお客様ご自身でご判断ください。生産開始後のキャンセルはお受けできません。輸入関税・税金は、輸入時に別途ご請求となります。