WORK LANVEC LDZ 18 inch FULL REVERSE – Black

SKU: WORK-LVLDZ-2P-18-BLK-7.0-FR

WORK LANVEC LDZ 18 Inch FULL REVERSE

¥72,040 ¥87,082 Save ¥15,042

Shipping calculated at checkout

Width: 18×7.0J
Colour: Black (BLK)

The WORK LANVEC LDZ in 18 inch FULL REVERSE, built to order in Japan. A genuine two-piece WORK wheel: choose the width and disc colour here, then tell us the inset you want from WORK's table below, and WORK builds the wheel to that spec.

WORK photographs Black, Cut Clear at this exact size and rim type.

What this page covers

Model WORK LANVEC LDZ
Construction 2-piece
Diameter 18 inch
Rim type FULL REVERSE
Disc colours Black (BLK), Cut Clear (MSP)
Widths 18×7.0J to 18×12.5J (12 widths)
Disk types O-Disk (DEEP RIM)
P.C.D. O-Disk: 5H-114.3(73.3)
Special P.C.D. Not offered on this model
Hub height clearance O-Disk 45 mm
Load rating WORK prints no JWL rating for this size and rim type
Air valve V24C
Rim finish Buff anodised (standard)
WORK catalogue code LDZ・HRH

What you choose on this page

  • Disc colour and width — in the variant picker above.
  • Inset — enter it in the inquiry form below, using the table below. Pick either one of WORK's fixed standard insets or any inset inside the order range — the price is the same.
  • Quantity — the price shown is for one wheel.

Insets — 18 inch FULL REVERSE

Width O-Disk — DEEP RIM
hub height clearance 45 mm · 5H-114.3(73.3)
Standard inset
fixed, same price 		Order inset
18×7.0J +53rim depth 32 mm / +48rim depth 37 mm / +42rim depth 43 mm +53 to +42rim depth 32–43 mm
18×7.5J +50rim depth 41 mm / +45rim depth 46 mm +59 to +41rim depth 32–50 mm
18×8.0J +45rim depth 52 mm / +40rim depth 57 mm / +35rim depth 62 mm +65 to +35rim depth 32–62 mm
18×8.5J +45rim depth 59 mm / +35rim depth 69 mm +72 to +34rim depth 32–70 mm
18×9.0J +45rim depth 65 mm / +35rim depth 75 mm +78 to +28rim depth 32–82 mm
18×9.5J +45rim depth 71 mm / +35rim depth 81 mm +84 to +22rim depth 32–94 mm
18×10.0J +35rim depth 88 mm +85 to +15rim depth 38–108 mm
18×10.5J — +85 to +9rim depth 44–120 mm
18×11.0J — +85 to +3rim depth 50–132 mm
18×11.5J — +85 to -4rim depth 57–146 mm
18×12.0J — +85 to -10rim depth 63–158 mm
18×12.5J — +85 to -16rim depth 69–170 mm

Notes

  • Price is per wheel. Built to order by WORK in Japan; allow for production time.
  • Each wheel comes with one centre cap and one air valve (V24C).
  • A buff-anodised rim is the standard finish.
  • Below 34 mm of rim depth the disc sits proud of the rim flange — though WORK notes that even above that depth the disc may still protrude very slightly past the rim flange, within tolerance.
  • Please ask us about the nuts or bolts you intend to use. WORK notes that its standard 5H-114.3 P.C.D. takes M14 mounting bolts, with a 60° taper seat.
  • WORK offers free TPMS processing on LANVEC LDZ, excluding 18×8.0J and below — on this page that covers 18×7.0J, 18×7.5J and 18×8.0J. Tell us if you need TPMS and we will confirm the sensor for your exact specification with WORK.
Fitment. Please choose your size and offset at your own discretion. Wheel regulations differ by country, and how far a wheel sits outside the fender depends on ride height and personal preference. We are glad to advise — ask us before you order — but the final choice of size and offset rests with the customer. Any vehicle examples shown are reference sizes only.

Quotation and fitment inquiry

Tell us the specification you are considering and the vehicle it is for. Kurumaya Tokyo JAPAN Co. verifies fitment with WORK before confirming an order. This form is an inquiry, not an order: nothing is added to your cart.

Selected on this page

WORK LANVEC LDZ 18 Inch FULL REVERSE

18×7.0J / Black (BLK)

SKU: WORK-LVLDZ-2P-18-BLK-7.0-FR

Your contact details

WORK wheels are built to order. Our recommendations are guidance only and are mostly based on the vehicle in its original (OEM) setup. We may be able to confirm fitment with a big brake kit, but wide-body and coilover setups are difficult for us to confirm. The final choice of specification rests with the customer, and an order cannot be cancelled once production has started. Import duties will be charged separately at the time of import.